Flexible high gloss oil varnish for interior and exterior wood

 ✅ High gloss oil varnish 
✅ Giving an elegant and sophisticated look to wood panelling 
✅ Finishing accents on your boat like handrails, wheel housings and trims 
✅ Perfecting window and door frames
 ✅ Varnishing vertical or horizontal surfaces 
✅ Decorating wooden furniture both inside and out 🖌️ SURFACE PREPARATION – 
New Wood : All new wood must first be treated with Deks Olje D1
Weathered wood previously treated with Deks Olje D1 : Surfaces must first be clean, dry and free of all surface contamination. Clean and restore any Deks Olje D1 that has lightened to a gray finish, with Net-Trol, before applying Deks Olje D2.
 🖌️ EASY TO USE – Do not thin Deks Olje D2.
Apply 6 coats, allowing a minimum of 12 hours between coats. All coats should be applied within 1 month.
Sanding between coats is not required but for an extra high gloss finish, sand between the last 2 coats with 600 grit paper.
If using in the marine environment, allow 3 days for Deks Olje D2 to set-up and dry before putting the boat in service. 🔧 MAINTENANCE - Wash frequently with fresh water to remove salt and dirt (especially in marine applications). 
Cover and protect everything you do not wish to treat. 
Deks Olje D2 should only be applied to surfaces treated with Deks Olje D1 or previously finished with Deks Olje D2.
 Do not apply Deks Olje D2 in wet weather or late in the day when dew or fog may be expected. This may dull a newly set film causing it to blush – exposure to sunlight usually removes the discoloration.
Deks Olje D2 is very slippery, especially when wet and we, therefore, do not recommend the use of it on decks and other areas where it will be walked on.

 THINGS TO REMEMBER -
 Cover everything you do not wish to paint.
 Apply between 8˚C and 35˚C.
 Do not apply in direct sunlight or on to hot surfaces. 

✅ CONSOMMATION – 15m2 (160 ft2) per liter.